CONDUCTOR'S SPECIAL 127H TRAIN HORN KIT - Torque Supply Co
CONDUCTOR'S SPECIAL 127H TRAIN HORN KIT - Torque Supply Co
CONDUCTOR'S SPECIAL 127H TRAIN HORN KIT - Torque Supply Co
CONDUCTOR'S SPECIAL 127H TRAIN HORN KIT - Torque Supply Co
CONDUCTOR'S SPECIAL 127H TRAIN HORN KIT - Torque Supply Co
CONDUCTOR'S SPECIAL 127H TRAIN HORN KIT - Torque Supply Co
CONDUCTOR'S SPECIAL 127H TRAIN HORN KIT - Torque Supply Co

CONDUCTOR'S SPECIAL 127H TRAIN HORN KIT

Regular price$785.99
/
Shipping calculated at checkout.

  • In stock, ready to ship
  • Inventory on the way
DESCRIPTION

WHERE BANG MEETS BUCK

Our Conductor's Special train horn kit is perfect for people who don't have a lot of room. It comes with our most popular train horn, the Shocker XL, and an air source unit that's easy to install. The train horn is made of strong material and you can individually mount each horn bell. It makes the same noise as real train horns, but it's easier to put in small spaces. It's a great way to get a big train horn sound without taking up a lot of space.

  • The loudest horns we manufacture, be heard for miles!
  • Stainless steel internals combined with the fiberglass-reinforced ABS construction ensures these horns are extremely durable through all conditions!
  • Individually mounted horns for flexible installation
  • All-inclusive train horn kit with everything needed for installation
  • 120 PSI 1.5-gallon air system provides 2-3 seconds of honk time

(Note: Tank mounted air compressors are not fully sealed. For this reason, the manufacturer recommends the tank/compressor system be mounted in the upright position in an enclosed space away from moisture, dirt, debris, etc... Failure to mount this product as directed will void the warranty)

**Detaching the compressor from the tank will void your warranty on this kit. If you need a solution where the compressor is detached, please look at our 232 and higher models. **

Please note: The 6 horn upgrade kit does NOT include the extension brackets to connect to our Shocker XL horn mount.

 

VIDEOS

The video in the link below shows our Shocker horns in a third-party decibel test alongside your typical "air horn" honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker Train Horns!


INCLUDES

 

  • SHOCKER XL TRAIN HORNS
  • HORNBLASTERS 127H AIR SOURCE UNIT
  • 90/120 PSI PRESSURE SWITCH WITH LEADS
  • 10FT OF 5/16" D.O.T. APPROVED AIR LINE
  • 17FT OF 1/2" D.O.T. APPROVED AIR LINE
  • 22FT OF 10-GAUGE RED WIRE
  • 22FT OF 18-GAUGE BLUE WIRE
  • 22FT OF 18-GAUGE GREY WIRE
  • 1/2" NPT BLACK WIDOW STAINLESS STEEL ELECTRIC AIR VALVE
  • BRASS NPT FITTING KIT WITH SAFETY BLOWOFF & DRAIN COCK
  • COMPLETE WIRING KIT WITH FUSE HOLDER & FUSES
  • MOUNTING HARDWARE
  • DETAILED INSTRUCTIONS
  • AIR LINE CUTTER
  • EARPLUGS
SPECIFICATIONS / FILL RATES

 

  • Part Number: HK-S4-127H
  • Operating Pressure: 120 PSI
  • Restart Pressure: 90 PSI
  • Voltage: 12-Volt DC
  • Horn: Shocker XL train horn
  • Horn Material: High-impact fiberglass reinforced ABS
  • Horn Measurements   
  • № 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm)
    № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm)
  • Horn Flare: 5″ (127 mm)
  • Air Source Unit: HornBlasters 127H air source unit
  • Air Source Length: 15.2″ (386.08 mm)
  • Air Source Width: 5.9″ (149.86 mm)
  • Air Source Height: 12.8″ (325.12 mm)
  • Air Source Weight: 13.75 lb (6.24 Kg)
  • Air Tank: 1.5 Gallon 4 Port Tank
  • Volume: 1.5 gal (6.6 L)
  • Air Compressor: 275C air compressor
  • Max Amperage: 18 amps
  • Maximum Duty Cycle: 25% @ 100 PSI
1.5 GALLON TANK FILL RATE
0 to 120 PSI 2 min. 10 sec. (±10 Sec.)
90 to 120 PSI 35 sec. (± 5 Sec.)
* Supply Voltage: 13.8 Volts

You may also like


Recently viewed